Building

Tiny Home Plumbing Basics: Pipes, Pumps and Pressure

6 min read · Updated December 11, 2025

By John

Fresh water, drainage, pumps and winterizing — a plain-English guide to plumbing a tiny home, on-grid or off.

Tiny Home Plumbing Basics: Pipes, Pumps and Pressure

The two sides of plumbing

Every tiny home has a fresh-water supply and a waste-water drain. On-grid, you connect to a garden hose and a sewer or septic. Off-grid, you pump from a tank or rainwater cistern and drain to a greywater system or holding tank. The components are the same; the source and destination differ. This is one of the systems covered in our DIY build timeline.

PEX and the fresh side

PEX tubing has replaced copper and PVC for tiny-home fresh water: it is flexible, freeze-tolerant, cheap, and joins with simple crimp fittings. Run a 12 V or 120 V pressure pump with a small accumulator tank to deliver steady pressure from a fresh tank. Use a whole-home filter at the inlet. Size the pump for your highest simultaneous draw (usually shower plus sink).

Drainage and the greywater split

Drain lines are PVC or HDPE, sized 1.5 in for sinks and 2 in for showers. Keep runs short and sloped 1/4 in per foot. If you use a composting toilet, there is no blackwater — only greywater, which can route to a greywater system. If you have a flush toilet, you need a black tank or septic connection. Plan the drain exits low on the wall so they clear the trailer frame.

Winterizing

Any plumbing in a tiny home that travels or sits in freezing weather must be winterized. Heat-trace cable and insulated boxes protect vulnerable runs; some builders route all supply lines inside the heated envelope. For off-grid winter use, see our winter living guide. If you will leave the home unheated in winter, drain the system and blow out the lines with a compressor — a frozen pipe splits in hours.

Related articles

More guides that dig deeper into the same topics.

Ready to start searching?

Browse tiny homes, plans, builders, communities and land on the interactive map.

Explore the map
>